Menu
Heater 750W ISOTHERM 024L series Basic Maximize

Heater 750W ISOTHERM 024L series Basic

IB240

916,76 €

-20%

1 145,95 €

On sale

24L STAINLESS STEEL 750W 230V HEATER
Description
Isotemp Basic model has an exclusive design with its hood stainless steel brushed. However the most important is its internal design. High performance are due to the location of the exchanger of hot water and underwater resistance. They are installed in the lower part of the tank, where the water temperature is lowest for actually heating the tank full and ensure a maximum hot water volume. The inputs and outputs of water are also designed to minimize the introduction of cold water in the hot water supply. The materials used are of the best quality, tank and piping as well as the parts in contact with water are in stainless steel, AISI 316 standard. The mounting feet, just like the cover, are in stainless steel AISI 304.
Each heater is tested against leakage at a pressure of 16 bars in the workshop. Water resistance is installed in order to facilitate the control and cleaning of the tank. Benefits of the water heater Isotemp Basic Sa design allows a vertical or horizontal installation high quality of materials and welds insulation by polyurethane foam for a minimum of loss Resistance immersed in construction for superior durability. Power 750W in 220V or 115V. The coil is particularly long for a very rapid temperature rise, which is ideal for yachts. 6 bars with check valve safety valve to reduce or prevent the risk of leakage in case of overpressure. Security in case of overheating by a thermostat with manual reset. The unit comes with a power supply cable fitted with a standard EU decision-making. Adjustable rigid mounting feet to 360 ° to facilitate installation on a wall. Exchanger and male threaded water outputs 1/2 "series thermostat all Indel water heaters are equipped with series of a mounted thermostatic mixer that brings the following benefits: preset the desired temperature of hot water to use. A + 45 ° C approximately, risk of burns are avoided and the losses in reduced piping. Use only the amount of hot water needed.
In conclusion, the thermostat brings a significant saving of energy needed to heat the water and freshwater.
Size: 460 x 390 weight (empty kg): 13 Resistance: 750W-230W